- Woodworking tools can be dangerous if not used properly. Only use woodworking machines that you have been trained to use properly and safely. Read the owner's manual carefully. Make sure you understand instructions before attempting to use any tool...Link: https://glassdoor.com/Location/PFH-Technology-Group-Dublin-Location-EI_IE122475.0,20_IL.21,27_IC2739035.htm
- What safety procedures should you follow when using woodworking machines? Always wear safety glasses or goggles, or a face shield with safety glasses or goggles. Wear dust masks when required. Wear hearing protection that is suitable for the level...Link: http://ftp.glennhowells.co.uk/1si70X5jw_70-680-lab-manual-answers_G.pdf
- Start buttons should be protected so that accidental contact will not start the machine. Ensure that all cutting tools and blades are clean, sharp, and in good working order so that they will cut freely, not forced. Turn the power off and unplug the power cord or lock out the power source before inspecting, changing, cleaning, adjusting or repairing a blade or a machine. Also turn the power off when discussing the work. Use a "push stick" to push material into the cutting area. Jigs are also useful in keeping hands safe during cutting procedures. Keep hands out of the line of the cutting blade. Clamp down and secure all work pieces when drilling, sanding, cutting or milling. Use good lighting so that the work piece, cutting blades, and machine controls can be seen clearly.Link: https://larsoned.com/realestate/post-licensing/questions-answers/
- Position or shade lighting sources so they do not shine in the operator's eyes or cause any glare and reflections. Ensure that the floor space around the equipment is sufficient to enable you to machine the size of work piece being processed safely without bumping into other workers or equipment. Use extension tables or roller supports for large workpieces. Supports should be placed on both sides infeed and outfeed. Woodworking machines should be fitted with efficient and well-maintained local exhaust ventilation systems to remove sawdust or chips that are produced. Electric power cords should be above head level or in the floor in such a way that they are not tripping hazards. Keep work area free of clutter, clean, well swept, and well lit. Spills should be cleaned up immediately. Floor areas should be level and non-slip.Link: https://chegg.com/homework-help/questions-and-answers/ada-risk-assessment-procedure-versus-substantive-test-timothy-steele-recent-college-gradua-q44962286
- Good housekeeping practices and workplace design will reduce the number of injuries and accidents from slips, trips, and falls. Keep the area free from water and moisture. Do not use electrical equipment outdoors in the rain. Always keep your attention on the work. For example, if you must talk to another person, turn off the equipment first. What should you avoid when working with woodworking machines?Link: http://ferguson.dadeschools.net/faculty/Departments/Science/Alonso/AP%20CHM/AP%20Exam%20Review/AP%20Free%20Response%20Questions/2003/Answers%20to%20AP%20Chemistry%202003A.pdf
- Do not wear loose clothing, work gloves, neckties, rings, bracelets or other jewellery that can become entangled with moving parts. Avoid awkward operations and hand positions where a sudden slip could cause your hand to move into the cutting tool or blade. Do not stand directly behind stock that is being cut, planed, or jointed to avoid injury from kick-back. Do not remove sawdust or cuttings from the cutting head by hand while a machine is running. Use a stick or brush when the machine has stopped moving.Link: http://msrblog.com/physics-mcqs-for-class-12-with-answers-chapter-4/index.html
- Do not use compressed air to remove sawdust, turnings, etc. Do not leave machines running unattended unless they are designed and intended to be operated while unattended. Do not leave a machine until the power off is turned off and the machine comes to a complete stop. Do not try to free a stalled blade before turning the power off. Do not distract or startle an operator while he or she is using woodworking equipment.Link: http://cvk.novapp.it/printable-ekg-strips.html
- This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Out of these, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may affect your browsing experience. Necessary Always Enabled Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information. Non-necessary Non-necessary Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies.Link: https://caled.org/wp-content/uploads/2014/12/FAQ-Certification-and-Education.pdf
- Answer: Always Be Careful 3 2. What is the name of the yellow lines on the floor around each machine? Answer: Safety zone 4 3. How many people should be inside the yellow lines per machine 3. How many people should be inside the yellow lines per machine? Answer: 1 5 4. True or False Loose clothing can be worn in the shop. Answer: False 6 5. True or False The operator is the only person to turn a machine on or off. Answer: True 7 6. What must be worn at all times in the shop? Answer: Safety glasses 8 7. True or False No running, pushing or shoving in the lab or shop. Answer: True 9 8. All accidents should be reported to whom? Answer: Mr. LeBaron 10 9. True or False All students are responsible for the safety of themselves. Answer: True 11 True or False Long hair should be worn in a pony tail.Link: https://quantamagazine.org/neuroscience-readies-for-a-showdown-over-consciousness-ideas-20190306
- Answer: true 12 What is the name of this machine? Answer: Drill Press 13 What is the name of this? Answer: Chuck key 14 Answer: Chuck key 15 When must this clamp be used? Answer: When Drilling something smaller than your fist 16 True or False Oily rags should be placed only in a fire proof garbage can. Answer: True 17 Answer: Disc Sander 18 Which side of the wheel do you sand your work on when using this type of machine? Answer: Down side 19 True or False You can have two people work on this machine at the same time. Answer: False 20 True or False It is OK to talk to somebody while they are operating a machine. Answer: False 21 Answer: Belt sander 22 Answer: Scroll saw 23 True or False The Blade should be tightened only by hand. Answer: True 24 True or False This saw is used to cut small curves. Answer: True 25 Answer: Band saw 26 True or False This saw is used only to make straight cuts. Answer: False 27 The guard on this machine should be how far above the material you are cutting?Link: https://acloud.guru/forums/aws-certified-cloud-practitioner/discussion/-MK0j3JveXFPKbf8RQhJ/passed_aws_ccp_oct_2020
- True or False All jewelry can be worn while working on the machines. Answer: False 30 What is the name of this hand tool? Answer: Hammer 31 Answer: Nail Punch or Nail Set 32 Answer: Hand File 33 True or False It is ok to open paint cans with this tool. Answer: False 34 Answer: Speed Square 35 Answer: Combination Square 36 True or False Hardwood comes from trees that stay green all year long. Answer: False 37 Answer: False 38 True or False Sanding with the grain is a good idea.Link: https://reddit.com/r/EdhesiveHelp/comments/kfe3h9/assignment_5_fraction/
- Answer: True 39 Which grit would sand wood the smoothest? True or False If you are not familiar with a machine it would be wise to ask for instructions. Answer: True 41 Answer: True.Link: https://eduvidya.com/Entrance-Exam/JNAFAU-FADEE
- Joist hangers are used for which of the following? Supporting joists against beams b. Keeping joists straight during delivery c. Inspection d. There is no such thing as a joist hanger. The main purpose of a joist hanger is to hold a joist 90 degrees to any type of beam as per the building code. All hangers are to be nailed with specific hanger nails in all available holes. Incorrect answer. Please choose another answer. The smallest mark on a tape measure is: a. Millimeter c. What type of hammer is commonly selected for trim work? Framing hatchet b. The others listed are for specific applications.Link: https://webmd.com/parenting/news/20200107/study-young-women-getting-pelvic-exams-they-dont-need
- What are plywood clips used for? Straightening floor sheathing b. Keeping plywood straight in stacks c. Supporting roof sheathing edges between the trusses d. There is no such thing as a plywood clip. Clips are used when sheathing roofs framed with trusses due to being 24 inch on center. The clip holds the plywood from being too weak between spans. A contractor is to excavate a basement containing 58, cu. She removes 3, cu. How many cubic feet remain in the basement?Link: https://codereview.stackexchange.com/questions/138557/functional-framework
- The course structure of CTS enables schools to design unique programs that meet the needs of students and take advantage of community resources. Developed across levels rather than grades, CTS has multiple entry points and provides secondary students with access to a common curriculum. As a competency-based curriculum, CTS recognizes prior learning from formal schooling and personal initiatives.Link: https://bulkreefsupply.com/content/post/can-you-trust-your-saltwater-test-kit-or-your-testing-skills-on-your-reef-tank-brstv-investigates
- It was deemed important to make sure practices for maintaining access to safety exams and artifacts were the same across the division in an effort to make sure they could be examined when needed. I came up with this following the cohort meeting at the September PD day. We seemed to be looking at each other a lot and not coming up with any earth-shattering developments. We are a different cohort in that while I am the CTS coordinator for the division, I am available to help with any issues or requests at any time. This is why I came up with the idea of posting positive comments about something found on the website, posting of things as requested, and posting of items which you have developed and find useful in your practice. I am going to suggest we do this this month and see if it serves us as needed. I believe all of the CTS teachers teach outside of CTS as well, so this is a good opportunity to explore those other cohorts. CTS is such a site specific, facility driven course that sharing successes which may, or may not, be applicable to your facility is the best we can offer.Link: https://gcsnc.com/cms/lib/NC01910393/Centricity/Domain/5386/Unit%2011%20Packet.pdf
- I will post anything you think would be of use to other CTS teachers in the division. If you have any requests for info, etc.Link: https://coursehero.com/file/11539908/EBF-301-Final-Exam-With-Answer/
- Take this opportunity to check area lighting, ventilation and fusible links on the self-closing covers. Good safety practices start with good housekeeping. Use the following guidelines for your shop maintenance: Clean up spills immediately. Keep walkways and stairs free of tripping hazards. Store oily rags in a covered metal container and be sure to empty it every night. Periodically remove excess cutting oils and filings from shop machinery. Keep all tools in their place and red-tag tools that need repair. Never wear jewelry or loose clothing around rotating machinery. Be cautious of any item that may become entangled, including long hair.Link: https://toppr.com/ask/question/2ht7hzha24-035s224-03aos-ketina20f5-rd-z-557/
- If you have any doubts or questions about the operation of a particular piece of shop machinery, never hesitate to ask your supervisor or a qualified co-worker. Share this:.Link: https://youtube.com/watch?v=7uo9tIs6Fuk
- However, this does not impact our recommendations. Why do certain professionals such as musicians, surgeons and NFL quarterbacks stay completely away from woodworking? Why has the SawStop met with so much resistance from manufacturers when the technology is so great? What is the real reason that school systems across America have eliminated woodworking classes from the curriculum?Link: https://chegg.com/homework-help/questions-and-answers/take-test-imscisjubailgovsa-ara-blacklist-walking-dead-juc-whatsapp-go--gmail-blackboard-l-q72847316
- Why do some of the most comprehensive books on woodworking not even mention safety? Is safety just not an important issue or is it taboo? The corporate world would rather address the issue when it becomes an issue. As a craftsman and educator I choose to take a contemporary approach to safety education: Be aggressive instead of passive. Most accidents occur because of improper techniques, bad habits, haste, fatigue, inexperience and overconfidence.Link: https://indeed.com/cmp/Sbg-Healthcare/faq
- Yes, hand tools have risks — but those risks are minimal in comparison to power tools. Woodworking changed the day that tools started to rotate under their own power. This rotation and excess power caused unbelievable risks to the user. Old-world craftsmanship had to change; a new generation of woodworking had to be developed with many new and unforeseen challenges. Grandpa never had to deal with terms such as kickback, work zone, high-speed cutter, guard, pinch point, feed rate, anti-kickback fingers, splitter, point of operation, face shield, dust collection, ear protection and on and on. For grandpa, woodworking was a human process; today it is both a human and mechanical process. Years ago I wrote a letter addressing these issues to every woodworking tool manufacturer. I was asking for help with the distribution of a new safety video that showed proper use of the most common stationary tools.Link: https://hondaatvforums.net/threads/trx300-fourtrax-no-start-suspect-cdi-regulator.21593/
- My request was that this video be given, for free, with the purchase of each stationary tool. No promotion, no strings, just pure education. But, it will also cause your customers to take a moment of pause, and realize your position and commitment toward their safety. The average woodworker today probably took a high-school woodworking class before man walked on the moon, and an awful lot has changed since then — including the enactment of the federal Occupational Safety and Health Act OSHA. The purpose of this law was to ensure safe and healthful conditions in the workplace. This act of Congress caused manufacturers, employers and all high school, college and vocational programs to re-think the entire process of hazards in the shop. Their focus on woodshop safety shifted to more on guarding and less on the attention to sound fundamental procedures to using all equipment safely.Link: https://youtube.com/watch?v=jGPo4Nsh0Zw
- Although OSHA requirements work well to protect us in the workplace, they have no effect on how we work in our private shops, and I believe this has added to the complacency of safety. Couple in the fact that the only place most woodworkers learned shop safety was from Woodworking in high school and for some; that was in the day of black-and-white photography. Before operating any power tool you must become thoroughly familiar with the way it works and the correct procedures to follow. As you learn to use a machine the correct way, you will also be learning to use it the safe way. I remember in my old high-school shop class the instructor said that you should always remove your rings and watches before you use any power equipment.Link: https://answers.yahoo.com/question/index?qid=20091221142704AAnRxd6
- I remember the safety speech in high school about keeping your fingers away from the blades on the jointer because they can cut you. That was my entire safety lesson! Great common-sense rules, but we need more. We were never taught the theory of the machine, the actions of the machine and the results of those actions. We never learned anything about where the control points were to maintain safe handling at and through the point of contact, nor did we learn the best ways to minimize exposure. Learn This Word: Control All woodworking machines operate by rotating or reciprocating motion, or by a combination of these motion s. Each machine is engineered to provide control that counters the actions taking place — especially at the point of contact. For example, a power miter saw does a great job using control to its advantage. The motion of the blade rotates away from the operator toward the fence, which causes the blade to actually push the wood, while being cut, against the control of the fence.Link: https://rpsc.rajasthan.gov.in/Static/AnswerKeys/6FBE1556-8D09-43D4-9242-D5D7DB85BA15.pdf
- At the same time the motion of bringing the blade down into the wood forces the wood down to the control of the table. The point of operation on a power miter box is at the bed and the fence. Because the wood is held stationary during the cutting process, it makes control easy to manage, unlike a table saw. Another great way to describe control is by examining the cut that takes place on a band saw. As the blade rotates downward toward the table, all the force behind the blade is pushing the wood directly on the table. As long as the wood is flatly supported on the band saw table, at the point of contact, there will be no kicking or grabbing because the control is the table at the point of the cut.Link: https://dmvwrittenexam.com/me-dmv-test.html
- Control can also be added to machines by the guarding, hold-down devices, fences, fingerboards, push sticks and other devices. Machine control and ways to create additional control will be discussed with each individual machine throughout this series. But remember this: No cut should ever be made without the use of the control surfaces.Link: https://udemy.com/course/practice-exams-aws-certified-cloud-practitioner/
- For example: How high should the blade be above the thickness of a board when using a table saw? No guards, no splitter, blades as high as they go. There is no advantage to seeing the actual cut take place when it causes the user to be at risk. When it comes to how much blade should be exposed, the rule is to minimize not maximize. Each time you make multiple cuts or passes you put yourself at more risk. For example there is no sense in making several passes over a table saw blade to make a wide cut when you could have done it in one pass with a dado blade. As you expose yourself to extra passes or multiple moves, you expose yourself to more risk. Exposure, however, can cut both ways. There will be less blade exposed, less kicking force and if the grain tears out on the first pass, it is easy to correct it on the second pass.Link: https://currentschoolnews.com/past-questions/download-nigerian-air-force-naf-past-questions-answers/
- This second point of exposure merely causes you to think about the safest way to approach each cut on any given machine. Three Types of Limitations There are three types of limitations to consider. The first two are common-sense: your physical limitations and the limitations of your shop space. There is nothing wrong with asking for or waiting for help to arrive. Just make sure that you and your helper work together as a team and if necessary do a dry run of the motions along with body and hand positions before the cut is performed. The second common-sense limitation is determined by the space in your shop. Small shops will require a lot of pre-planning and strategies for large or heavy wood.Link: https://quizizz.com/admin/quiz/5d6e80e2a7decb001a1585ed/level-3-success-pnc-exam-1
- The third limitation, which is definitely the most important limitation to understand, is what each machine is capable of doing or not doing. Every machine has a limit as to the size of material that it can cut or handle safely. We automatically know the width, depth and thickness limitations of a planer because the bed is only so wide and can be adjusted up and down only so much. When using a planer, you have to know when a board is too short or too long. You have to know the proper feed rate for the depth-of-cut. And you have to know to what thickness stock can be planed before you need to add a carrier below your stock before the knives become dangerously close to the cast iron bed of the machine.Link: http://italiain.pl/old-san-olr/9ecbad-2-1-practice-continued-patterns-and-inductive-reasoning-worksheet-answers
Monday, May 24, 2021
Woodshop Safety Test Answers
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment